Using Our Magnets

Paper & Magnet Thickness

Standard Flex Magnets are 20pt thick when finished. Paper and magnet thickness may have up to a .001 differential.

​

Outdoor Magnet Instructions

Preparing Magnetic-Receptive Surfaces:

• Before affixing magnetic sheet to a metal surface, be sure all surface paints, clear coats and waxes are cured (hardened).

• Clean the metallic surface and the magnet with mild detergent, wipe with soft cloth.

​

Applying Flexible Magnet:

• Affix to smooth, flat or gently curved metallic surfaces.

• Make sure the entire magnet is flat against the metal surface (i.e., no air pockets).

• If you place the magnet in the wrong position, completely remove the magnet from the surface and re affix. Do not pull the magnet across the surface, or it may stretch due to the resistance caused by the high magnetic strength.

• Avoid use on horizontal metal surfaces exposed to direct sunlight (such as automobile hoods) or temperatures exceeding 150°F (66°C).

• Be aware that long-term use on surfaces frequently exposed to sunlight (such as vehicles) can result in uneven fading of the surface because the magnet-covered area is shielded from ultraviolet rays.

Cleaning Flexible Magnet:

• To guard against moisture and dirt buildup between the magnet and the metal surface (particularly on outdoor applications), remove the magnet at regular intervals.

• Clean both the magnet and metal surface with mild detergent; wipe with a soft cloth or allow to air-dry. (For vehicle mounted signs, remove and clean WEEKLY.)

• To protect fresh clear coat, base coat and/or vinyl surfaces on new cars and trucks, remove magnetic signs DAILY.